NLENFor installers

WaterAccu for installers

The Nymo sends surplus solar energy to a standard electric water heater.

  • Around 20 minutes' work at a customer you're already visiting
  • Hardly any configuration needed, so you won't need to return
  • A Dutch engineer on the line if you get stuck

Webshop, wholesaler or large quantities? Email us for terms and conditions →

Prefer a complete set via a wholesaler? The Green Energy Pulse is available from Technische Unie (opens in a new tab), Wasco (opens in a new tab), Warmteservice (opens in a new tab) and Rensa (opens in a new tab).

Ordering as an installer · step 1 of 3

What's your VAT number?

Step 1: your VAT number

Then you'll see your price straight away. No account needed.

We'll check it in the European VAT database (NL and BE).

  • Delivered in 3 working days
  • 2-year warranty
  • 15-day returns

Why your customers are asking for this now

1 Jan 2027
end of net metering (salderingsregeling)
70%
of solar power now goes back to the grid
€ 336
average annual savings for your customer

What you install

Two components from us, and the electric water heater you add.

The sensor is placed near the smart meter in the consumer unit.
In the consumer unit

Sensor

Plugs into the P1 port of the smart meter. That's done in a minute.

Specifications
Range
1 to 30 metres
Smart meter
P1, DSMR 5.0 or 4.2
The Nymo main unit with the sensor in front of it.
Near the electric water heater

Nymo main unit

Hangs between the socket and the electric water heater, and steplessly sends precisely the surplus, between 100 and 3,000 watts.

Specifications
Voltage
220 to 240V AC
Max. load
3 kW (13 A)
Weight
2.2 kg
Dimensions
166 × 243 × 91 mm
A standard electric water heater.
Your choice

Electric water heater

Tesy, Bosch, Itho Daalderop: the brand you work with. Any 'dumb' electric water heater works, from 100 to 200 litres.

Sizes and which electric water heaters work
100 L
1 to 2 people, ± 7 kWh
120 L
2 to 3 people, ± 8.5 kWh
150 L
3 to 4 people, ± 10.5 kWh
200 L
4 people or more, ± 14 kWh

Yes: mechanical thermostat, single-phase, up to 3,000 watts. No: display, timer, electronic thermostat, heat pump and smart electric water heaters.

Everything about the electric water heater on Technology → (opens in a new tab)

Does your customer have a Homey? Then the sensor is not needed. Nymo x Homey → (opens in a new tab)

Is it suitable for your customer?

Three things to check before you make a quote.

Smart meter A P1 port with DSMR 5.0 or 4.2.

With DSMR 5.0, meters from 2015, the sensor works without issue. With 4.2, it gets separate power via USB-C. Kamstrup meters and meters from 2014 or older do not work. If the port is already occupied, a splitter can be used.

Panels and inverter Any brand, single-phase and three-phase.

Nothing needs to change on the inverter. The sensor sums the feeding back to the grid across all phases into one value.

Combi boiler (optional) Only needed if you reheat with gas.

Then the boiler must be less than fifteen years old and have the NZ quality mark, found on the gas inspection sticker.

The standard setup

Nine out of ten installations use a combi boiler. The Nymo sends the surplus to the electric water heater, and the boiler heats up if the water isn't warm enough yet.

Diagram: cold tap water first goes through the electric water heater and comes out pre-heated, then through the combi boiler to the shower and tap. The Nymo is connected to the socket and sends 100 to 3,000 watts to the electric water heater. The P1 sensor near the smart meter wirelessly transmits what's left over. Heating remains on the boiler.

A heat pump, district heating or an extra central heating tank for heating? View all five setups → (opens in a new tab)